Jump to content

Controllable-pitch propellers and Azipods on imported ships


Recommended Posts

Controllable-Pitch Propellers for Imported Ships

Imported ships can use controllable-pitch propellers (CPP) with either a conventional shaft drive or azimuth pods. CPP is configured per propeller, so each propeller can have its own blade angles, pitch rate, and operating RPM.

In Ship Setup, select Prop1 pivot or Prop2 pivot and switch from Fixed Pitch (FPP) to Controllable Pitch (CPP). Set the ahead and astern blade angles, the pitch rate, and the operating RPM. Enter both angle limits as positive values. The simulator applies negative pitch for astern thrust. Set Operating RPM to 0 to use the configured engine maximum. Save the setup and reload the ship.

Conventional shaft drive

Add controllablePitch to the relevant entry in propellers in your boat.json. For visible blade movement, assign the hub to mesh and export each blade as a separate FBX mesh. Each blade needs its own pivotCm at the blade root and an axis in boat coordinates. The example shows one blade entry. Repeat it for each blade using its own mesh name, pivot, and axis.

ETrkaG.png

 

Azimuth pods for Imported Ships

  1. Open Ship Setup and configure two propellers. Propeller 1 is port and Propeller 2 is starboard.
  2. Enable Azimuth drive and position the Port pod swivel and Starboard pod swivel markers. Each marker sets the pod’s swivel axis and thrust location.
  3. Choose a Pod model for each side:
    1. Ocean Star (built-in) includes the housing and an animated propeller. Adjust Model scale to fit your hull. A scale of 1.0 uses the original Ocean Star size.
    2. Custom FBX uses your own meshes. Assign the housing under the pod swivel and the separate blade mesh under the corresponding propeller. Set the propeller’s spin pivot and axis there.
  4. Click Save JSON and reload the ship. In single-player, the Azipod HUD lets you control thrust and angle for both pods together or independently.

Using custom FBX meshes on both sides

Merge the following fields into your existing boat.json. The first entry in each array is port, and the second is starboard. Replace the mesh names with the exact names shown in Ship Setup and adjust the positions to fit your ship. All positions are in ship-local centimetres.

dfkETw.png

To use two Ocean Star pods, set useBuiltInModel to true in both pods entries. With the built-in models, you can omit the housing and propeller mesh fields and set visualScale separately for each pod.

 

Azipods with controllable-pitch propellers for Imported Ships

Add the same controllablePitch settings to the corresponding propellers entries. Both propellers and azimuthDrive.pods use port first, starboard second.

  • Built-in Ocean Star pods already have individually animated blades. Set useBuiltInModel to true on each pod you want to use and enable CPP on its matching propeller entry.
  • Custom FBX pods use the same blades setup as a shaft-driven propeller. Assign the housing mesh to the pod and the hub and blade meshes to the matching propeller. Each moving part needs a unique mesh name.

Dac6l8.png

Merge these snippets into your existing boat.json and adjust the mesh names, positions, and RPM to suit your ship. Use Animate in Ship Setup to preview the blade movement. For a bridge readout, add RoundPitch or SquarePitch under Bridge Equipment.

Link to comment
Share on other sites

  • MarkoBarthel changed the title to Controllable-pitch propellers and Azipods on imported ships

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...