Jump to content

Fuel setup for imported ships


Recommended Posts

Fuel setup for imported ships

Open your ship’s boat.json and add the six fuel settings to the handling section. The example below configures a twin-engine ship with a shared 2,500-tonne tank that starts full. Adjust the FBX filename and ship setup values to match your model.

 

8ALHVF.png

 

Enter fuel consumption per engine. The simulator adds the consumption of all running main engines. In this example, one engine at full throttle uses 4,700 L/h. Both engines at full throttle use 9,400 L/h combined, or about 7.90 t/h.

Enter tank quantities in litres and consumption rates in litres per hour in the JSON. Set bDisplayFuelInTonnes to true to see tonnes and t/h in the vessel status panel. Set it to false to display litres and L/h. You can also adjust these settings in the Ship Editor under Handling → Fuel. Save the JSON and start a new voyage to apply the changes.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...